|
* |
Tx Frequency |
|
851/869 - 894 MHz |
|
925/936 - 965 MHz |
|
1800 - 1990 MHz |
|
2110 - 2170 MHz |
|
* |
Cover interface standards |
|
AMPS,N-AMPS, NMT,TACS,GSM,CDMA,TDMA,IDEN,UMTS |
|
* |
Total output power |
|
32W( 800MHz: 8W, 900MHz:8W ,1800-1950MHz:8W ,2100-2200MHz:8W ) |
|
* |
Designed to cut off wave only in the down-link band width, Therefore it doesn't affect any Interference to base station and repeater
(Actual jamming coverage achieved in each location depends on area topography, distance of the location from the nearest base station antenna and type of mobile phone) |
|
* |
RF output indicating of LED display |
|
* |
TNC antenna connecter |
|
* |
IR Remote Control : operation range of 8-10M |
|
* |
Automatic power switching power supply |
|
50/60Hz/AC 100 ~ 240V transmitting to DC 24V |
|
* |
Dimension |
|
480mm (L)ͺ 400mm (W)ͺ 190mm (H) |
|
* |
Weight |
|
11.5kg |
|
* |
Operating temperature |
|
-10 ℃ ~ + 60 ℃ Four fans of convection and add metal filter |
|
* |
Humidity |
|
5% ~ 80% |
|
* |
Jamming range |
|
Radius 50M - 80M up the signal must <-80dBm in the location |
|
* |
Safety regulation |
|
AC Adapter UL (E190582) |
|
CSA (LR112971 Level 3) |
|
* |
Housing |
|
Weatherproof and shockproof Pelican case |
|
* |
Installation Remarks |
|
Plug in the antenna according to the frequencies |
|
Plug in the AC power and then plug in DC jack to the Jammer |
|
When the LED is on, the Jammer is activated |
|
Before turn on the power, please make sure both antennas are correctly plug in |
|
The antennas have to plug in according to the frequency to the right connector to prevent short circuit. |
Products 
