LCM-3 PRO

      Police Laser Jammer 

The LCM-3 Pro Laser Jammer will detect, alert the driver, and jam every laser gun used around the world. The LCM-3 Pro Laser Jammer is designed with 2/4 laser modules, installed in the front grille, or front grille and rear bumper, depending on size of car, truck or SUV. The LCM-3 Pro Laser Jammers is beeing tested in performance in Speed Measurement Laboratories INC Since 2007 (http://www.speedlabs.com).

The LCM-3 Pro Laser Jammer blanks the speed display reading of all laser guns, such as St

alker LZ1, LTI Ultralyte, Laser Atlanta, Kustom Pro III, front and rear, giving you time to adjust your speed.

When the LCM-3 Pro laser jammer Detect Gun Laser Beam, It gives the Driver alert while Jamming  the Beam and then being Shut’s off giving the driver time to adjust his speed and allow laser gun to detect the car “adjusted speed”.

When any one of the 2/4 laser jammer heads detect the laser gun within 3 Pro00 – 400 feet, that laser module starts to jam the gun. As the distance increases and the laser beam diameter increases (laser beam gets wider as distance to laser gun increases), lets say 3 Pro00 meters or 1000 feet, the wider beam is detected by more laser modules, thus more jamming modules turn on to blank the laser gun display. The old laser guns had a wide laser beam, while the new laser guns have a more narrow, laser beam.

Any one of the 2/4 laser modules will detect and jam all police laser guns at any distance from the laser gun around the world: USA, Canada, Mexico, South America, Chile, AUS, NZ, Hong Kong, Europe, Asia.

FEATURES :

·        Detects and blocks all police laser guns made today in Europe, Asia, USA, Canada, Mexico, Chile, AUS, HK, NZ. It does not matter where the laser gun was made. We have tested against all of them and the LCM-3 Pro Laser Jammer defeats them all, even the most difficult Stalker Lz1, LTI Ultralyte and the Laser Atlanta in Stealth mode.

·        Scans constantly for laser acquisition. The LCM-3 Pro Laser Jammer has been tested against every laser jammer in the world at Speed Measurement Labs. Tiger Lily Products works with SML every year to determine which products provide the best performance, and the LCM-3 Pro is 5 Star performance.

·        Very small package for easy, hidden installation. Each module is compact and easy to locate in the grille, near the license plate or on the rear bumper

·        Defeats all laser guns with "Jam to Gun" performance. Guys of LIDER have confirmed the LCM-3 Pro Laser Jammer is the very best performance at any distance that a laser jammer can provide today. 

·        Defeats constantly when laser is detected. The LCM-3 Pro will consistently blank the laser gun as long as it detects the laser signal.

·        Four Laser LCM-3 Pros provide front coverage on license plate and headlights.Depending on the size of the vehicle, all 4 laser blockers can be installed in the front grille, or 3 Pro can be installed in front and 1 on the rear bumper.

Speed Measurement Laboratories INC Guarantee - The LCM-3 Pro is that Good! The LCM-3 Pro now offers a Ticket Rebate, since its performance is so good, we know if they use a laser gun against you, they can not get your speed.

Speed Measurement Labs performance review below can be summarized in this Carl For's quote: "It successfully defeated every laser gun, every time, in every targeting circumstance, from every distance. SML does not condone nor promote the use of any countermeasure, but admires the technological superiority of the LCM-3 Pro in rendering useless laser speed gun enforcement."

HOW DO POLICE LASER GUNS GET YOUR SPEED?

The laser gun sends out a very narrow laser beam filled with invisible light pulses, pointed at your license plate or headlights. The laser beam reflects off your vehicle, back to the laser gun.

The time required from transmission until the reflection is received is calculated by the laser gun's computer. This measurement is made about 70 times in 1/3 Pro of a second for fast, high accuracy.

HOW DOES THE LCM-3 Pro LASER JAMMER WORK?

A laser module adds laser "noise" to the reflected signal. The LCM-3 Pro XTreme correctly analyzes the incoming laser gun pulse, which is different from manufacture to manufacturer, and gets past the laser gun filters to cause the speed gun display panel to remain blank.

The various laser gun signal profiles are stored in processor memory, and when a laser signal is detected, the first 3 of 70 pulses are analyzed to define what code we use to mimic their signal with noise. By the time the 4th pulse is detected, the LCM-3 Pro has already blanked the laser gun display. This analysis and response occurs extremely fast, and the laser gun never had a chance to display the speed of your vehicle!

The LCM-3 Pro constantly scans for laser, but defeats only during the alert phase, thus provides long life for the product. When laser is detected, the Laser Warning System installed in the driver's compartment provides warning, giving the driver time to check vehicle speed.

After speed is checked and adjusted, the driver should turn off the system to enable the officer to detect your vehicle's adjusted speed. Once past the speed trap, turn it back on.

HOW DOES THE LCM-3 Pro LASER COMPARE TO WINDSHIELD-MOUNTED LASER PRODUCTS?

The authoritative Field Test Report by Speed Measurement Laboratories, points out the importance that a laser

 jammer must be installed in the grille area, not up in the windshield, as some products offer.

If you have a product that claims to jam laser from the windshield, the laser gun can not be defeated when

 they aim the very narrow beam down in the grille. Police don’t aim the laser gun beam up in the windshield, since the laser beam will go in the front and out the back windshield. They aim at highly reflective surfaces: such as the headlights, front and rear license plates…down in the grille!!!

Specification :

Speed Measurement Laboratories Specification And Brochure Installation Guide