WE GM1000

The WEWEGM-1000 is multiple intercepting device with many functional function. This is a Small size, tri band GSM module with abilities to detect and transmit phone line active, voice active and external input of alarm trigger.

This device is also equipped with internal shock detector that activate the GSM transmitting when movement is being indicated .

Even though it is vary Easy to install and It has an internal battery with Quick charge mode and led indicator.

 

• GSM tri band GSM network to make & instant surveillance task possible. No range

limitation

• For home phone line security, monitoring all outgoing and incoming phone

conversation.

• Auto switch between phone line and area voice monitoring. Phone line is first detected.

• Auto calling when detect phone line in used, can turn on or off.

• Built in high sensitive dual microphone.

• Auto calling when detect voice level in WEGM-100 area, can turn on or off.

• Auto calling when detect external device input, like infra red sensor alarm, can turn on

or off.

• Auto calling when detect shock for WEGM-1000 can turn on or off.

• Dual mode function, can operate independent without phone line plug in, auto detect

function, Auto switch to phone line monitoring function.

• External microphone input can be used as voice unlimited repeater, transmit using GSM

network.

• Low battery SMS sending, and LED indicator flashing.

• SMS control function.

• One touch button operate system

• Built in high capacity LI-ION rechargeable battery.

 

Bands: GSM 900 /1800 /1900MHz Siemens module

Size: 62(L)x40(W)x(20(H) mm

Weight: 45g

Life time: 72 Hours (standby mode)

3 Hours (sending mode)

Battery: 3.7VDC 1200mA (rechargeable LI-ION)

Power charge: 5V-6VDC

 

 

1. ACT led is indicator if one of alarm mode is active, and low battery indicator led.

    • flashing means one of alarm mode is active.

    • flashing detect alarm mode and begin to end SMS and calling made

    • flashing means low battery. It will flashing every 5 seconds continuously till battery is

     charge. And will send SMS for “LO-BATT” for one time

2. FUNC button is switching for shock alarm and IR alarm on/off.

   • Press FUNC button once the ACT led will flashing from slow to quick begin to

     switch on shock vibration mode and IR mode to active on. Can be canceled by

     pressing FUNC button once again.

   • When shock alarm mode is active on, and detect shock vibration WEGM-1000 will

     waiting for 10 seconds for user to switch off by pressing the button once. And WEGM-

     100 will switch off the shock active calling mode, otherwise will send SMS and

     calling for active call.

3. GSM led indicator when power on the WEGM-1000 the GSM indicator will flashing

    every seconds continuously, searching for network. When network found the GSM

    indicator will flash on for 0.5 second and off for 3 seconds.

4. SIM card button is button to release SIM slot out.

5. Power switch is switch WEGM-1000 on or off

6. EXT-MIC microphone voice monitoring external line in.

7. EXT-IN is external detect for alarm system detect B+ to active. ( like IR motion, radar

    detector)

8. LINE-IN for phone line input.

9. Charge voltage is be able for 5-6VDC.

10. Charge led indicator, will on when the charge is running, and off for full charge.

      When charge led flashing mean the an error charge, need to take out and plug in the

      charger again.